This is one of the problems homeowners experience where they set their thermostat say at 71 degrees during winter and for some reasons their house only warms up to 69 degrees Fahrenheit. From experience, this problem generates lots of service calls. While at times this could be a genuine problem, in most cases especially in the cold weather of winter, even a normal working heat pump may have trouble attaining the desired temperature.
To try and explain this, you must first be familiar with the manner in which a heat pump operates. Below a certain temperature, a heat pump loses its efficiency and may not be able to keep up with the heat loss. This means some supplemental heat must come into play to assist the heat pump and this usually comes from electric furnaces or resistance heaters. As the temperature edges towards room temperature, the backup or supplemental heat cycles off and the heat pump continues running in an attempt to push the temperature up which in most cases doesn’t manage.
Therefore, if it is very cold outside and you want your house to be at a certain temperature, you may be forced to raise your thermostat by about 2 degrees Fahrenheit in order to maintain it. However, when it is not extremely cold outside and your heat pump still doesn’t attain the desired temperature then there could be a problem somewhere.
Below are a number of causes that may contribute to your heat pump not reaching the desired temperature.
Some of these problems can be addressed by the homeowner while others require you to make a service call for professional attention. Before making that service call, you need to run a checklist of the following things.
If you have completed the above checklist and still the problem persists, call your HVAC technicians so that they can diagnose the system. As a caution, do not attempt things you are not familiar with because working with electricity can expose you to the dangers of high voltage and electrocution.